Fitting Systems
fitting systems for walls and ceilings.
Acoustic GRG Products ltd can offer the following methods of fixing panels and products
 |
The L Bar system is designed for chain-hanging panels from a fixed ceiling, the L Bar is mounted to the panel securely and is suitable for all panel sizes up to 3000mm and for 50mm, 75mm and 100mm panels. a snaplink and 150mm of chain is supplied, giving a total dropto back of panel of approx 200mm as standard. Drops over 200mm are available, simply request extra chain. |
 |
Opposing batten mounts, or 'Split batten mounts' are available for wall mounting products to a wall, absorbing panels would be mounted with the batten surface mounted to the rear, this gives a mounting distance of 15mm from the surface, giving a small increase in panel performance, or additional wood battening can be used to mount the panel further off the surfact for more improvement. Wood diffusors and wall mount modex use the Split Batten to mount flush with the wall. Assuming the wall is flat and true the panel has the appearance of an invisible fixing. |
 |
Ceiling mount Z bar give a close, easily demountable, ceiling fixing system. The Zbar is mounted directly to the panel, and an opposing part is fixed to the ceiling, the panel clips over the bar, giving approx 35mm drop and an off-set of 25mm. Suitable for all panels 50mm, 75mm and 100mm. |
 |
Flush mounting Impalet clip. This is a fast and effective mounting solution for absorbing panels. Simply screw or stick the Impalet clip to the surface you wish to mount too and push the panel to the fixing. Allow 25mm mounting drop to align panels. Suitable for all panels 25mm, 50mm and 75mm, and for smaller 100mm panels. |
 |
Snaplink and chain, we recommend you supply your own hook-eye as different surfaces require stronger mounts, hook for illustration purposes only! |
*coming soon* |
Corner Mounts |
Rotofast fixings - see below |
Rotofast - Fast and simple panel fixing, for wall or ceiling - www.rotofast.com
 Everything you need to install an acoustical ceiling or wall panel in 5 easy steps. |
 Step 1 -Screw Rotofast Snap-On Anchors into the back of the panel using the Rotofast driver tool. |
 Step 2 - Insert marking plugs into the Snap-On anchors. |
 Step 3 - Push panel against wall to mark anchor locations. |
Step 4 - Screw ratchets to wall at marked locations. (#8 screws recommended)
|
 Step 5 - Firmly push panel onto ratchets to complete installation. |